Hello I have to change the clutch lever on my SP3 (don't ask...); it's non-adjustable and is just stamped "@brembo". Looking at it it's not at all obvious to me how to remove it. Any help would be welcome. Thanks Andrew
On your lever there should be a pressed steel nut on the underside. Undo the nut, push out the pivot and the lever is released.
OK, just done what I should have done before posting, had a proper look at the lever... The top bit doesn't actually look like a bolt, but there does indeed seem to be a hex-shaped bit underneath which I guess will undo and the bolt will come out. Thanks anyway!
