Hi all. i want to swap my OEM clipons for aftermarket ones but in doing so you loose the mounting point for the steering damper rose joint on the standard bars. Also with the aftermarket clip on clamps being deeper than the OEM there isn’t enough of the 53mm diameter flat fork leg surface to mount an aftermarket damper clamp to. Anyone got an elegant mounting solution to get around this please?
Pretty sure Ducabike ones come with the steering damper attachment already machined in. Anything else you will probably need a separate clamp for.
Cheers Dave. Was looking at the Ducabike ones today funnily enough. They still need a separate damper clamp but look like the clip on clamp is less deep that some other brands, the the damper clamp they do is narrow too, expensive old setup though with the both. https://conquestracingltd.com/produ...-r-panigale-v2-adjustable-handlebar-clip-ons/ https://conquestracingltd.com/product/ducabike-ducati-panigale-cnc-steering-damper-support-clamp/
You can get a 53mm bracket to enable you to swap bars! Give Brett at rrps a bell he will sort you out!
Cheers Phil. Pretty sure I don’t have room even for a thin bracket like that. I’ll get a photo of the setup over the weekend when I’m with the bike.
hi, did you ever find a solution for this, having same issue. Am sure there must be some racers on here who had a solution
Yeah i had the same on my 22 V4, Spider clip ons have the mount for the OEM steering damper. Let me see if i can find images of it installed.
