Hello lovely people. I have the good fortune to have OCD when it comes to wiring looms. I specialise in replicating Bevel and Pantah engined bike harnesses using my 40 years of electronics experience, 14 years as an RAF radar tech and 10 years doing custom and one off motorcycle looms. If you're in the market for a high quality harness give me a shout. I have the following looms: 750 SS/GT <'75 900SS/Mike Hailwood Replica '78-'80 900 Darmah Pantah 500/600/650 750 F1/Montjuic/Santamonica. 748/916/996 Race/Track Day front loom to remove left bar switch/speedo/warning light and Ignition Switch. I am looking for complete looms for other models in this range, so If you need a harness, and it is not listed, please get in touch to see if I can help.
It should be, some of them are pretty cheaply put together. UK manufactured wire, OE connectors and all splices crimped and sealed with adhesive lined heatshrink.
Oooh wish I still lived in the UK sometimes, 58 Million 68 Million people is a much bigger market than 5.5M to allow people like you to thrive, and would save me the grief of having to do it myself!! Now I have the pleasure of hooking up this lot and makeing them speak to each other: But, at least I have just received a nice package of goodies from vehiclewiringproducts, that may assist: Bear with me, having issues all the time with "image too large"..... I see this forum software has a bit of catching up to do I give the fuck up: You'll just have to imagine a picture of cables, sleeves, heat shrink kits, connector block kits, spade & terminal kits and crimping tools etc... Well duh, I had to post in ms first then link the image I posted there, to here: Or maybe not..... the image preview is shown to me, but get a broken image on saving so yeah now I do give up: You'll find it over here: https://www.ducati.ms/threads/what-have-you-done-to-with-your-ss-today.396649/page-107#replies
Nah can’t be arsed if you have to jump through hoops to display a simple cut & paste image there’s something wrong with the software, most forums have moved on from html…
I’m not certain but I believe he means a how to build your loom, could be mistaken though the Wife says I am so wouldn’t be a shock.
HAHAHA my sincere apologies, I was so hacked off with what shoulda been a simple task uploading an image it clouded my sanity!! Cheers, but I'm pretty sure I'll manage, I've done a fair bit of wiring before hence I took the plunge to DIY, just that if you'd been near me I'd much rather a pro do it properly. However if you're writing a book lemme know, I love reading about stuff anyway!! I have a copy of Ru Paul's wiring as well... It's not a full rewire more an integration of new things like electronic cockpit & sensors new RR & LiFePo batt, new Ignitech & TPS etc, a little bit of faffing but nothing crazy, so I'm sure I'll be fine
If you haven’t already, download this https://www.fastbikegear.co.nz/index.php?main_page=product_info&cPath=1636_1640&products_id=12384 Well worth the small sum. I will ping you a draft of my book when it is finished. As a matter of interest, how was Rupe’s book?
