916 Fairings In The Shed?

Discussion in '748 / 916 / 996 / 998' started by Leonlc, Jul 8, 2026 at 11:18 AM.

  1. Hey All,
    Anyone have some 748/9*6 lower fairings laying around not being used? I’m not fussy on the colours or they have scratches(preferably no cracked or broken panels please). I can have them painted to match my existing panels.
    Thanks ☺️
     
    #1 Leonlc, Jul 8, 2026 at 11:18 AM
  2. I do and was gonna say I will drop them off, but then saw your location……
     
    #2 Paul55, Jul 8, 2026 at 11:24 AM
    • Funny Funny x 1
  3. I neglected to say I’m am happy to pay for them and postage of course.
     
    #3 Leonlc, Jul 8, 2026 at 12:19 PM
  4. Sorry can't help, I do have fairies at the bottom of my garden though.
     
    #4 Marcoduc, Jul 8, 2026 at 12:41 PM
    • Funny Funny x 1
  5. Still available from Ducati - just bought a set for spares.
     
    #5 KevB, Jul 8, 2026 at 5:19 PM
    • Agree Agree x 1
    • Useful Useful x 1
  6. I am planning on fitting a oil catcher belly pan and trimming a brand new set to fit is sacrilegious
     
    #6 Leonlc, Jul 8, 2026 at 7:14 PM
  7. Then I think you need two side panels and a race belly pan.
     
    #7 Paul55, Jul 8, 2026 at 7:15 PM
    • Like Like x 1
  8. That’s correct I am looking for the two lower panels. Left and right.
    Race belly pan I have under control.
     
    #8 Leonlc, Jul 8, 2026 at 7:18 PM
  9. I have these from a 748 998 slab bottom fairings IMG_7849.jpeg
     
    #9 VtwinDave, Jul 8, 2026 at 8:18 PM
  10. Mine is a race set up. No join in the side panels, belly pan for spillages.

    IMG_9486.jpeg
     
    #10 Paul55, Jul 8, 2026 at 8:32 PM
    • Like Like x 1
  11. Hi Dave,
    Those look so tempting but I believe the slab sided panels have a different profile to accommodate the updated V-piece. Not sure if they are plug n play to the older duct ed panels.
     
    #11 Leonlc, Jul 9, 2026 at 8:24 AM
  12. Very nice setup Paul. :upyeah:
    May I ask where you found the mounting brackets for the belly pan?
     
    #12 Leonlc, Jul 9, 2026 at 8:26 AM
  13. They came with the bike and in fact the one in the photo is the wrong size, so top panel fitted to belly pan, but not the bracket.
     
    #13 Paul55, Jul 9, 2026 at 4:32 PM
  14. When I had a similar setup on my 916SPS Bitsa I made the belly pan support brackets myself out of aluminum alloy sheet.
    It was pretty simple to do.
     
    #14 RickyX, Jul 9, 2026 at 7:37 PM
    • Agree Agree x 1
(You must log in or sign up to post here.)
Do Not Sell My Personal Information