What Are Those Called And...

Discussion in 'Technical Help' started by Lucazade, Sep 15, 2014.

  1. #1 Lucazade, Sep 15, 2014
  2. hose tails
     
    #2 Cranker V2, Sep 15, 2014
  3. #3 gregotch, Sep 15, 2014
  4. Thx. The brass hose barb is what I need in general. However now need to look for one with correct thread to go in to exhaust manifold plus have the connector at 6mm.
     
    #4 Lucazade, Sep 15, 2014
  5. the search i used was "air line connector angled" if it helps get you in the right areas.bound to be something or someone turnup who sells them/can ask etc
    could of sworn i saw a similar thing in the nitrous parts type area as well,but was long while ago.
     
    #5 gregotch, Sep 15, 2014
  6. My NOS kit uses threaded type with Goodrich hoses.
     
    #6 Exige, Sep 16, 2014
  7. Well I am not fitting NOS kit...... Well not to this bike. It is for a humble scottoiler.
     
    #7 Lucazade, Sep 16, 2014
  8. Do you mean to go into the inlet manifold Lucas?
     
    #8 PeterT, Sep 16, 2014
  9. You need a 1/8 BST to fit the gas take off ports on the exhausts
     
    #9 chrisw, Sep 16, 2014
  10. Top item on this list Luca

    Linky
     
    #10 figaro, Sep 16, 2014
  11. #11 Birdie, Sep 16, 2014
  12. Deffo NOT on your exhaust!!
     
    #12 keith916, Sep 16, 2014
  13. Thx Guys,

    Purchased two, spare is always welcome.

    Keith916 what ya mean?
     
    #13 Lucazade, Sep 16, 2014
  14. AFAIK scotoilers work on vacuum to open a tap,this needs to be worked off the inlet side.Just like a vacuum fuel tap.
     
    #14 keith916, Sep 16, 2014
  15. Yes Lucas they need VACUUM not hot exhaust gases.:D
     
    #15 PeterT, Sep 16, 2014
  16. D'oh stupid me, D'oh D'oh D'oh.
     
    #16 Lucazade, Sep 16, 2014
  17. You said it buddy.:Banghead:
     
    #17 PeterT, Sep 16, 2014
  18. Not an issue, you just use the ports on the intakes usually used to attach vacuum gauges.
     
    #18 figaro, Sep 16, 2014
  19. Missed your post about the Scottoiler. I believe vacuum take off ports use a M5 x 0.8 thread.
     
    #19 chrisw, Sep 16, 2014
  20. any motor factor will sell for pennies screen wash connectors that could easily be fitted and sealed to an intake rubber.
     
    #20 finm, Sep 17, 2014
(You must log in or sign up to post here.)
Do Not Sell My Personal Information