748 More Suspension Settings Woe

Discussion in '748 / 916 / 996 / 998' started by Cranker V2, Mar 15, 2015.

  1. Does anyone know the standard settings for mine? I'm running 30mm offset triples, ohlins R&T forks, mag swingarm (corse spec), corse rocker, revalved and resprung ohlins shock. it's also about 40kg lighter than a standard 748bip. Confused of cheshire :Banghead:
     
    #1 Cranker V2, Mar 15, 2015
  2. Sounds like a trip to Kais is needed.
     
    #2 chrisw, Mar 15, 2015
  3. i am running a near as dam it spec to where you are at.........
    sorted at Northampton:p:cool:
     
    #3 andyb, Mar 15, 2015
  4. 6 rings at the front, set a 17deg swingarm/rear spindle angle min tied rod length, 3 clicks out comp and 5clicks out reb fromt and rear for balance, dont forget your sag 45mm front and rear static
     
    #4 bradders, Mar 15, 2015
  5. 14 tooth sprocket make any differrence?
     
    #5 Cranker V2, Mar 15, 2015
  6. Nah, you'll lost too much top end
     
    #6 bradders, Mar 15, 2015
  7. pm me an email and ill send you something i got given a while back..
     
    #7 andyb, Mar 15, 2015
    • Like Like x 1
  8. If you put it on the rear it could be a bit sluggish of the line.
     
    #8 Birdie, Mar 15, 2015
  9. No more than normal..
     
    #9 bradders, Mar 15, 2015
  10. i thought that was down to a diet of beer and lard...
     
    #10 andyb, Mar 15, 2015
  11. It goes like fok in the back of the T4. A bit smokey though.
     
    #11 Cranker V2, Mar 15, 2015
  12. If you get stuck, have a word with Andrew at Maxton in Frodsham, they'll sort it out Mike
     
    #12 Kenoir, Mar 15, 2015
    • Thanks Thanks x 1
  13. I was advised I needed 3 extra teeth on mine so I've fitted an 18 got to dremel shit loads off the casing to stop the chain jamming up, do you think this'll cause a problem :)
     
    #13 Tobytyke, Mar 15, 2015
    • Funny Funny x 1
  14. Youre silly!Put a pushbike chain on it.
     
    #14 keith916, Mar 16, 2015
  15. You laugh...some guy in a gixer fb pag pe just put split link on his k5 1000...then asks if it will be ok :Banghead:
     
    #15 bradders, Mar 16, 2015
  16. Oh let's not got started on these.
    A mate asked me how to get more top speed from his TZR125 when we were 18.
    I said take 2-3 teeth of rear sprocket.
    He didn't like the result and said he only took 2 off cos they're a bastard to file flat!
     
    #16 1037sps, Mar 17, 2015
    • Like Like x 1
(You must log in or sign up to post here.)
Do Not Sell My Personal Information