Whats The Gig With These Coosh Drives?

Discussion in 'Technical Help' started by finm, Jun 10, 2015.

  1. yip, certain now the big nut was loose (i think) will fire it back together later. now that i have found another bit to clean
     
  2. They'd all walked sideways, this was spotted after the 1st session at Donington the other week, my mates lad said "What are all them shiny metal bits on your back wheel" :Wideyed:. This is exactly what they looked like when I removed the carrier & sprocket :mad: I thought I'd centrepunched the sprocket to stop em backing out and on inspection I had however realised the sprocket was a hardened Ali one and my "punching" hadn't a chance of distorting it enough to work, they'd done a fantastic job of milling the hub down :Bawling: Luckily enough not too much, and the heat (boy was that swingarm hot) doesn't seem to have affected the bearings either :upyeah:, so £100 + from a dealer? ridiculous for what they are but hey ho could've been worse :(
     
    • Agree Agree x 1
  3. good job your loaded.
    just cleaned this sprocket ready for smashing it back together found a crack in the center bush right across looks like it might be normal? feckit it's going back together any hoo
     
    • Like Like x 1
    • Funny Funny x 1
  4. Think I read on here that they can crack - got a piccie?
     
  5. :Watching: Been searching and can't seem to find any Exact Fit bobbins :( :D
     
    • Drama Queen Drama Queen x 1
  6. They don't fit :)
     
    • Face Palm Face Palm x 1
    • Funny Funny x 1
  7. They will with a dab of snake oil :D
     
    • Funny Funny x 1
  8. Exactly?
     
    • Agree Agree x 1
  9. just put it back together, what i cant see i wont let bother me :smile:
     
    • Like Like x 1
  10. You seen it now, you need to forget about it :Wideyed:
     
  11. forget about what?:smile:
     
  12. Your cracked rear hub, don't keep asking!!! :Wideyed:
     
    • Funny Funny x 1
  13. [​IMG]
     
    • Like Like x 1
  14. I haven't seen that Elsie bloke around lately have you Fin?
     
  15. Elsie who? whats his gig?:smile:
     
  16. Isn't he a bobbin :)
     
  17. on the crest of a wave?
     
    • Like Like x 1
  18. right, forgot i had the workshop manual on the laptop at home.
    185nm for big sprocket nut 26-32nm for bearing carrier clamp all cleaned and slight dab of grease when installing. no mention of needing to press the cush drives in to the sprocket just a good tight fit no play.
     
  19. Job done, commence with the riding :smile:
     
  20. Your Hub is Cracked!!! :Wideyed:.............:p
     
    • Funny Funny x 1
Do Not Sell My Personal Information