The app was free though - maybe there is someone clever on here that will know , maybe there is someone clever on here
According to Gates, the app is not currently available on the App Store because of incompatibility with IOS9 but they are working on it.
Could it go the other way , would it make any difference , tell you why I ask , one of the Alfa Romeo models I work on think it's 156 at one model year it tensions one way and the later model year (which is the same set up )goes the other way . If you go one way the eccentric rolls the belt around the crank a little more , if you go the other way it rolls it around the cam more , albeit only marginally . Considering the crank is the driver and the cams are the driven you would think the bias would be to wrap round the crank the most , but if you look at the Ducati set up the belt only goes on half of the cam sprocket , I assume to turn Desmo cams does not take the same effort as springs and bucket followers , then again some car cam belt only go around the cams by half of the gear ...... sorry just rambling here ..... move on nothing to see here yadder yadder .....
If you turn it clockwise it pushes the belt very close to the other idler pulley and runs the risk of it rubbing on its self. Steve
Yes; now available free from the apple app store. Very simple & works well on the iphone :thumbsup: Can be founding by searching "Carbon Drive".
Anyone who has the app and has synced their iPad/iPhone to their computer, the app file will be backed up to the computer and can be distributed [emoji6]. I'll check to see if I have it but I should do as I have the app
