Looking to get this colour plate and springs for my 748, has anyone used this kit and brought from this company, Ducati 748 916 996 998 749 999 851 888 Druckplatte clutch pressure plate Corse
Hi Andy No not taken plates out yet, was looking at getting a coloured plate and springs and then look and fit at the same time.
The pressure plates for the standard and slipper are different. You really need to do some checking first. Andy
Going to go for red with carbon open cover, will check for sale section for a few days and see if anything turns up first, once I've got all the bits and pieces then i will take all plates out and have a clean up, bikes getting there now
Just a suggestion, the red anodised plates go a manky pinky colour over time. I was going to do it that way but in the end, just cleaned up and painted the std pressure plate black then added some Oberon red collets and new springs. Looks decent enough and saved a few quid doing it that way. The black pressure plate doesn't show the dust either. Ian
Others have suggested CF are not good covers as offer the clutch no protection if the right side hits the deck.
Thats not a bad idea, do you have a photo, i could paint it red and will take a look at metal covers.
I can see the red fairing think i will give that a try, hammerite red here we come is that a metal cover.
Yes mate. A JHP job. I've also got a red corse one and also a full DP carbon one if you need either... Ian
