T9 Grey Swing Arm Bearing Removal

Discussion in 'Technical Help' started by Cream_Revenge, Nov 14, 2016.

  1. Hey

    As above. On the left it's 2 roller bearings, can these be knocked through or do they need to be pulled from either side?

    Right side looks like wheel bearing type. These need pulling?

    TIA?
     
    #1 Cream_Revenge, Nov 14, 2016
    • Nuke Post Nuke Post x 1
  2. Anyone before I get the hammer back out???
     
    #2 Cream_Revenge, Nov 14, 2016
    • Nuke Post Nuke Post x 1
  3. For future reference, heat gun + hammer works :)
     
    #3 Cream_Revenge, Nov 14, 2016
    • Nuke Post Nuke Post x 1
  4. I've just been in the garage having a look at one of my spare black swingarms to answer you - got all oily :mad: looks like they will tap out yes :mad:
     
    #4 Exige, Nov 14, 2016
  5. Appreciate the efforts. [emoji106] .
     
    #5 Cream_Revenge, Nov 14, 2016
    • Nuke Post Nuke Post x 1
  6. Put the bearings in the freezer before putting back in.
     
    #6 Nelson, Nov 15, 2016
    • Agree Agree x 1
  7. And eat on the day of defrosting :Finger:
     
    #7 Exige, Nov 15, 2016
  8. The outside one needs to be knocked outwards from the inside.
    The inside one needs to be knocked inwards from the outside.

    There is a step/flange that limit how far in the new bearings can be bashed - so you can't bash em both one way.
     
    #8 Air Duck, Nov 15, 2016
    • Like Like x 1
(You must log in or sign up to post here.)
Do Not Sell My Personal Information