i for sale duc.ee servo buddy, used for 1 year in working order. For those not certain what it is, when you disconnect exhaust servo EOBD light will come on. By connecting this to where servo was EOBD light stays off as it sends signal to ECU that all is OK. Price £35 delivered in UK. New ones are about 55 delivered. I think it will work with any Ducati that has same connector but can be wrong. Definitely works with Hypermotard/SP/Hyperstarada 821 and 939 I also have SC-Project AFM unit. AFM (Air Fuel Modifier) is a unit you plugin between temp sensor and ECU. It then takes actual air temperature reading (using stock air temp sensor) and modifies it before it sends it to ECU. The colder it is the richer the mixture should be so by turning the dial you tell ECU it is colder then it actually is and richer the mixture. Side effect temperature shown on dash is not correct, it is temp that AFM sends to ECU. Easy install entire loom supplied. One end connects to air temp sensor (under the dash), another to loom via air temp sensor plug. Then there is a longer cable at end of which AFM sits on. Unit is fully operational, the dent on photo is due to lack of space under hyper seat and mechanic took of seat at one stage, did not move AFM and squashed it a bit. Price 80GBP. They sell for over 160Euros new. I think it will work with any Ducati that has same air-temp sensor as Hypermotard 821/939 but can be wrong. Definitely works with Hypermotard/SP/Hyperstarada 821 and 939
