Separate names with a comma.
Like I said before, I’ve used automec Dot5 on my 1098s and now on my 1299s since 2008 and never had an issue whatsoever… I renew the whole clutch...
Try using Dot5 silicone fluid in your clutch, it’s expensive, but you only need a bit and it doesn’t go off.. I use it in my 1299, no more issues...
Check that the main 2 bolts that hold the riser to the bars are tight.. Remove the 4 bolts that hold your bars in the riser clamps, support the...
I bought a cheap set of box sockets from Screwfix, then you can thread the cable through and use short Allen keys to turn..
Remember they were 21k when new and someone had to pay that.......
My reply was for V4sDuke, FN deal with it.....
If you get no joy with a new engine,I’m sure JHP Coventry will make your engine better than it ever would have been...them guys build race engines...
Now sold, thanks...
Hi Stephen,you could call JHP Ducati Coventry to see if they have any fuel tanks from bikes converted to race,ie using full race spec and storing...
borrozzinomoto give this company a try in Italy,much cheaper and I received my 1098s SC Brembos £58 within 3/4 days.. I went through ebay......
Hi Mark, JHP explained that nothing was an issue with my QS on computer and put it down to if you hold your foot up or down for more than 3/5...
Hi Mark,is your QS Problem sorted?
Just has my 1299s serviced, new QS fitted, now for first time ever, bike stalled around 30mph 3rd gear, slow for a up and coming junction and...
Forgot,new battery fitted,Oberon clutch slave cylinder, all done at JHP.. Bike is now home and back up for sale private....
Just had new Series Oro discs fitted and Brembo pads at JHP Coventry,full MOT when sold... Requires tyres although will let new owner pick tyres...