What part of my multistrada did this fall off?

If its the size of a 10p it could be a flexible exhaust or oil cooler mounting.

 

Have you taken off the cat. If so it's prob just dropped out of bracket behind left footrest that isn't used anymore

 

It can only be rubber mounts that hold radiator/oil cooler or exhaust mount?

 

Had a quick check there, them vibration mounts are under rear seat to hold rear fender on too (x4)

 

When fitted it would have a top hat shaped washer either side to stop it squashing.

 

I think it's the grommet (Vibration damper pad) which supports the bottom of the oil cooler, see the page for the oil cooler in the spare parts catalogue, part ref 2 – Part No. 764.1.022.1A.

It fits into the removable panel in the bottom of the fairing, see the Fairing page, part ref 6 –Part No. 480.1.293.1A (Half-fairing (front)(bottom).

I found it on the floor after putting the lower fairing back on, when I installed a guard on the oil cooler.

 

Ape2Duc,

Here's a few pics of what they call Vibration Pads which look like your culprit:

​

They all look the same to me and there might be more but it's likely one of the above is your source.

All the best, Mark H

 

Check the radiator and oil cooler mounts - especially if you have had Guards fitted to either.
Odds on its from there.

 

Like you say.. How has it fell off..? Needs a bolt to come loose i guess

If you cant find it, dont worry to much, i found one on the garage floor second day i had bike, ive never found one missing and i have been allover the bike

Can only think it could have been dropped on production or something and got wedged untill it found its way out??

Thats my theory anyway !!

 

Does the bike still ride OK?

 

Spot on-that's it. Prone to come off when beak removed/installing too.

 

Jeez, don't mention a tax disc, the natives will be up in arms ;-)

If everything is as it should be, stick it in the spares box for later.