Hello, For those who have a rear single sided paddock stand for their Hyper, what is the diameter of the pin? I’m after a 2nd hand stand for my Hyper 821, but it has a pin diameter of 20mm. Allegedly, the owner’s used it on their Hyper 1100. My concern is that the Hyper paddock stands that I’ve seen online typically have a pin diameter of 21.5 / 21.8mm. Not sure if using a 20mm pin will cause problems? Thanks.
I have a Pin that I can sell you that will fit the smaller Diameter. They're the same as the M1100S etc.
I’m not at home but from memory it’s around 30mm at its widest stepping down to around 22mm about an inch or so in from the left hand side
