Jamie, you always bring out products better than similar designs I've recently purchased. First the nav mount, now this. Next time I'm looking for something fabricated for the bike I'll message you first. At least I got there with the spacers.
I got mine yesterday chain adjusting spanner looks great, I’ll have a trial fit in the morning when I’m cleaning the bike. Not so impressed with the 3D printed measuring guides as they have a build up round the lower edge where they print against a flat surface making them not ‘actual size’ I possibly should have waited as I’m sure I read that you may be making something similar to the Ducati toolkit version (that wasn’t in my kit) as I think this would be better and wouldn’t rely on guessing where the centre of the chain is.
New chain and sprockets just done, all started with me wanting to try a 14t front and realising my chain was screwed. My first attempt at a rivet link so use to split links back in the day, but a lot easier than i thought it was to do, I dont even know why i thought of taking it in to be done. Well happy.
Revisit of a great idea Jamie. http://motorcycleinfo.co.uk/mts12_faq/chain_adjuster/mts1200_hub_spanner_design.htm http://motorcycleinfo.co.uk/mts12_faq/chain_adjuster/mts1200_hub_spanner.htm http://www.motorcycleinfo.co.uk/indexb146.html?fa=contentGeneric.psqlmptrfsppjcbe&pageId=1285193 https://andyw-inuk.smugmug.com/Motorcycles/Ducati-Multistrada-1200/Ducati-Hub-Chain-Adjuster-Tool/
