To adjust 749S compression dampening I need to put a screw driver through the wheel spindle. My wheel spindle holes don't line up with the holes in the forks. Does it rotate in the fork bottoms or has it been installed in correctly? I can't change my compression and I don't know if I can rotate it without removing it or I need to loosen every thing off.
The wheel spindle just not lined up. Undo it, line up, tighten and your in check a toolkit of you have one, there should be a tool for the job
Yes the spindle does rotate in the fork bottoms. Slacken the pinch bolts and spindle bolts and rotate the spindle to line up the holes. There is a tool available to assist DUCATI 916 998 999 ST2 ST3 ST4 748 749 Front Wheel Axle Alignment Tool | eBay. Duke
