For Sale 748(r)/9xx Bits And A Few 848/1x98 Bits – Must Go!

Here we have a load of bits I’ve got lying around that must go. Barely touch the bikes these days since I took up flying and started building my own aeroplane.........


No prices, I’m open to sensible offers for the better stuff and silly offers for the rest. Don’t be shy, make me an offer otherwise it’s going to the scrap man/land fill! Guide price = cheap!!!


Quick photos in the link below, message me for more info/photos/questions if interested in anything.

https://photos.app.goo.gl/YcVQYWaVhRqosK5o7

Most of it needs a clean!


Collection from Newark or postage at cost.

Item just added:
Ohlins Steering damper with Harris billet clamp - small scrap on bottom where clamp screw goes, not visible when installed. Not sure of fitment - it's longer than the one on my 748 but I reckon it would work on a 748/9xx, it might well be off a 1098. See the pics for dimensions. - Sold

More items just added:
748R Crankshaft
996 Rods (will fit others)
DID 525 ZVM 94link chain - fitted once but unused (because I bought a magnesuim swingarm for the project bike)


748/9xx Parts in no particular order:

54mm Termignoni Titanium system – 998 headers but will fit others if you can find/make different headers. Small dint on one can, not visible when fitted. A dint expert would probably push it out. System is partially cleaned and polished (I stopped part way through cleaning it when I acquired a second system). - Sold

748R Frame, Powder coated gunmetal. Marked as exported but I have the original registration document, should be feasible to put back on the UK register.

748 Crankcases – new bearings – got to be worth a few quid just for the bearings. - Sold

748 Pistons and cylinders – approx. 20,000 miles - Sold

748 Throttle bodies - Sold

748R Injectors

748R Lower airbox

916 Gearbox components - Sold

916 Pistons and rings - Sold

Rear calliper - Sold

Yellow airbox - Sold

Red anodised clutch plate – unused – fits most dry clutch non slipper models - SOLD

Biposto undertray - Sold

Bottom yoke x2 – Standard fork size, can be machined to fit ohlins - Sold

Brembo master cylinder – unused but unknown fitment

Cambelt covers and manifolds - Sold

Chain guard - Sold

‘Samco’ style cooling hoses – don’t think it is complete, but most are there - Sold

Front and rear sprockets – little use - Sold

Front callipers – with Brembo pads that have has little use - Sold

Left upper fairing panel – needs respray - Sold

Carbon monoposto under tray - Sold

Quick release sprocket carrier – not sure which brand of sprockets fit

Light weight race fairing cowl support

Rear calliper mount - Sold

Rear disc - Sold

Rear light - Sold

Biposto subframe - Sold

Showa forks – early calliper – some corrosion on upper tube - Sold

Showa forks – late calliper - Sold

Showa rear shock - Sold

Steering tube - Sold

Swing arm rocker - Sold

Swing arm – repair for chain rub - Sold

Fuel tank – dinted and filled – need good clean and respray - Sold

Tool tray - Sold

Top yoke - Sold


848/1x98 Parts:

1098 Brake hoses – look new

848/1x98 Standard cambelt covers

848/1x98 Carbon cambelt covers – not the best quality but look good on the outside

848/1x98 Rear calliper

848/1x98 Carbon throttle body plate

 

Biposto subframe - sold.

 

Ohlins steering damper added to the list above.

 

Load of pics of the 54mm Termis. I've had one offer and they are going to get a bargain at the moment.........unless you offer more.

 

New items added:
748R Crankshaft
996 Rods (will fit others)
DID 525 ZVM 94link chain - fitted once but unused (because I bought a magnesuim swingarm for the project bike)

 

Yep, will message you.