Hello, A few more bits and bobs dug out last night. Be quick as I am only home for one week. DP clutch cover with small mark (unseen on bike) £40/45€ DP sprocket cover £20/25€ DP heat shield (needs laquer) £20/25€ JHP air filter (new, non shower injectors) £40/45€ Dynojet QS £50/55€ Rear disk £25/30€ Front disks 999RS 6mm rotor 10mm offset (nos may need spacers for other 749/999) £200/220€ 999RS Termignoni titanium/SS rear box 60mm £400/440€ I can bring some of this stuff to southern uk at the weekend if that would be helpful?
Are you sure they are 999rs discs? I have a set on my bike and they have less offset than a std 999 disc. I had to use spacers behind them. So not a direct fit but can be made to fit.
You may be right. I bought a whole lot of parts from a neighbor who used to race a 999RS. Unfortunately he is no longer around to answer questions, sadly! How would I check the offset?
Yes I see now. I have measured from the underside of the disk. I will get the micrometer out again in the morning.
Offset is 10mm Some Ducatis use 10mm offset 5 hole discs. Such as some monsters and others. The only issue can be that the 6mm discs clears the pad retaining pips in the calipers. I used 5mm spacers and M4 calipers with no issues, when using 999rs discs. https://www.hsmotoracing.com/manufa...-ducati-749-999-848-1098-1198-1199-clone.html
