1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Multistrada High Mount For Tomtom Sat Nav

Discussion in 'Clothing, Gadgets & Equipment' started by Supertrooper137, Jun 20, 2020.

  1. Hi... looking for help. Just had the High Mount Sat Nav fixing put on my Multistrada 2017. DUCATI PART, FITTED BY DEALER. It attaches to the windscreen adjuster clamp, so the idea is the satnav sits above the dash bang square in lower section of view. Fits great.... however, when I went to fit my TomTom 550 quick release and charge block (that was fitted to my handle bar via the normal clamping arrangement) it wont as the holes in the tomtom bit are blind and I can't now screw into the new mount..... any ideas?
     
  2. I fitted mine OK on my Navihalter mount - you may need to change the mount plate if yours is different.

    On mine, no adapters are needed. I put the screws in from the back ie from the windscreen side through the Navihalter into the TT mount, then refitted the wind screen :)

    [​IMG]

    [​IMG]
     
    • Agree Agree x 1
  3. Would that be a steering damper good sir?
     
    • Agree Agree x 1
  4. It is yes, I was not a great fan of it bolting to the tank with it being plastic...but as long as the damper is not cranked up too tight, there is no flexing.

    Ohlins damper and Ducabike brackets. It stops the mild headshakes that used to concern me a little. The Multi is real twitchy at speed ( IMO anyway) :)

    [​IMG]
     
  5. Hey - I have these bits if they’re if any use....? Hadn’t thought about selling them yet but I am sure we can sort something out if you need any of it.

    1BAEF92E-0A28-41E9-90BD-7ABE0B07F90F.jpeg
     
  6. If it’s a Ducati Navihalter bracket, I think their only for the Garmin 390.
    If I remember correctly it has to be modified to suit a Tomtom.
     
    • Like Like x 1
  7. E9EE49A3-F5EA-470D-B008-7A8AE583D63E.jpeg

    I made an adapter plate from this chopping board. There’s a thread about this elsewhere.
    I’ve since bought one from someone on here, it looks a bit more professional than my attempt.
     
  8. Have a look at this thread - https://www.ducatiforum.co.uk/threads/multistrada-1260s-high-navigator-mount-set-£45-postage.76158/

    I sold my high mount satnav the other week, the last two pictures show an adapter that I bought with the mount that allow the tomtom to be fitted to what essentially only takes garmin devices.

    The bracket attaches to High mount then the tomtom quick release mount attached to the plate shown using 4 screws that are as you say blind.

    I bought this originally from Snell Ducati (on its own) back in late 2019, they may still have one kicking about or could provide dimensions so you could make / get one made..
     
  9. Hi Mate.... I'm interested, what do you want regards these bits (how much inc postage) please. You can contact me on [email protected] ...... cheers Gary
     
  10. Already sold my high mount and adapter, best give Snell Ducati a call and see if they still make them

    Cheers Pat
     
  11. I still have all mine - PM you in a minute.
     
  12. Thanks for the info.... I did and bought from Snell. Next day delivery too!
     
    • Like Like x 1
Do Not Sell My Personal Information