Used Bursi Evolution, Bucci clone, 6 ball and ramp, slipper clutch comprising the following : Ergal clutch basket Clutch centre Belville washer, M20 and M25 centre nuts and Centering washer (sits in the spider spring) Spider spring Clutch pressure plate (new bearing) Pierced clutch cover The springs and caps may still have some life in them but are included only to hold the clutch centre in place. £350 including Parcelforce, 2nd class, UK mainland post. Andy
To be fair Chris, the centre has done about 150 track miles and the thing has been kicking around my tool box so happy to call it used. Unlike the 1098R clutch I have run out of time to post in full which is new. Be cheaper than buying from the dealer but won't be as cheap as £350. Andy
It was bought for a 748 track bike which, like the 916 (996 & 998) uses a 20mm gearbox shaft nut. I have also included a 25mm nut which will fit the 1098 and 1198. Andy
I’d say yes but the plate order for the clutch will need to be different (friction plate in first for instance).
As @RickyX said, the Ducati OE plates for the dry clutch are the same but on a slipper clutch, the first plate in is a friction. So long as you have 7 x aluminium backed, organic friction material plates and 7 x 2mm steel compression plates, I can help you out with a 1.5mm dished steel plate which is potentially the only difference. Andy
I’ve had no explicit expression of interest, just a couple of questions which I have responded to. Feel free to PM me. Andy
