1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

V2 Renthal Sprocket & Carrier

Discussion in 'Panigale' started by JamieW, May 15, 2021.

  1. Has anyone done this on the V2? Just done it and it's way off so I'll need to send it back. Fortunately I ordered over the phone and they checked for me (for this reason). Not sure if the renthal site is wrong or not so if anyone's done this before let me know. Might have to try AEM or something instead, but quite like renthal.

    PXL_20210515_084731756.jpg
    PXL_20210515_093033702.jpg
     
  2. What was the part number for the carrier unit that they supplied?
     
  3. Was a 183 for 1299/Pani R. Dunno if all of the V2 hub part numbers are the same as the older models though.
     
  4. Quick googling gives 182 for 1098/1198/mts etc, and 183 for panigale
     
  5. Just doing some digging, AFAM list a completely different carrier part number to other Ducati bikes which suggests it is unique in some way. There wasn't a difference in the fitting on the hub as everything lines up including the pin holes for retaining clip so it must be the carrier design itself.
    Screenshot_20210515-130746.png
    Screenshot_20210515-130819.png
     
  6. This is what renthal says on their site which I'm guessing is what the place I got it from probably checked, but can't be right.
    Screenshot_20210515-131301.png
     
  7. Might pay to have a mooch on a ducati parts site and compare the oem numbers for 1098/1299/v2 assemblies and see how it looks. A few people have missed the spacer washers out on these in the past on here, but the change in offset in your pics looks far too large for that.
     
  8. Cheers. I'll do some more digging. Also be calling the company I bought it from Monday so they might do some too. The spacer was the first thing I checked when I changed it back as I thought the same thing. I hadn't measured at that point, but as you say, it's not a quarter of an inch worth :D
     
    • Like Like x 1
  9. My V4 is part number D183. I’m sure yours should be a D182...Mine was slightly over once assembled, But my front Renthal sprocket was slightly offset to allow for the difference. I used a laser tool to check alignment after and it was pretty well Bob on.... Hope that helps

    48064789-DF69-4D87-AA5A-474CA357AD1F.png 08D76D78-DA47-49D0-890A-E086F636D183.png 426ADAD1-6C20-4C14-8080-6F6844B5F804.jpeg 1442CB23-4981-4F14-A442-CCD3FBF96DA2.jpeg 20EE0ACF-9ED5-4780-B941-11F2AF2F4740.jpeg EBF3A83B-D888-4B70-B4C6-CEA88E177A6B.jpeg F101CD43-7722-470D-8309-74B6E04643A0.jpeg 6AE59A7A-6768-400A-821A-9C86D4EA7CEC.jpeg
     
  10. I ve got spares
    1 x Renthal 182
    1 x JT (fits Renthal sprockets) 182
    Ill swap you for the 183 if you want?
     
  11. Renthal 182 (1098 1198)v the AEM equivalent to 183 for the v4
    IMG_5564.jpg
     
  12. JT top and Renthal left for V2 1098 1198 and the AEM with black AEM sprocket for the v4

    IMG_5565.jpg
     
  13. If it helps the outside flanges are slightly different too and not just in colour, between the 1198 and the V4...
     
    • Agree Agree x 1
  14. The rear sprocket touches the swingarm even as fully adjusted out as possible so I can't see how it can be right (43tooth same as oem). On a side note, I'm in awe of how immaculate that bike looks :astonished:
     
    • Thanks Thanks x 1
  15. Hello.........................
     
  16. Who you asking to swap with mate? Sorry I'm probably somewhat slow today o_O
     
  17. YOU! you are the only one with the wrong carrier......:joy:
    I think you have one that fits my V4, I have two that will fit your V2 a Renthal and a JT both the same take Renthal sprockets.
     
  18. Put your wrong carrier with a sprocket on it layed down on a flat surface and measure the flat top outside edge of the sprocket. Ill do the same with the Renthal one I have with a sprocket on it we can compare numbers to find the 1/4 inch you require...
     
Do Not Sell My Personal Information