Genuine Ducati performance carbon air tubes.could probably do with re-laquering Slight damage around one of the indicator fixing point but doesn’t affect the installation of indicator. A set went for £260 on eBay so priced fairly. £150 posted
Am I right in saying these don't take an air-filter. Meaning you need a different setup in the airbox itself ?
^^^^^^^^^^^^^^^^ also Piper do one as well, plus there's a couple of other designs out there for these.
Those foam filters remind me of a well known Prodigy song.(and not breathe!) BMC at the transition from intake tube to airbox are expensive but worth it.
That is correct. I use BMC filters which connect to the airbox on otherside of where the ducts connect. Or you can use an over trumpet one.
No. If you look inside the tubes listed you’ll see the channels for the std filter cages to slide in. DP air tubes are the only ones which will take the std air filters.
Can’t remember now if some did and others didn’t but the runners were only fixed in with a bit of silicone and came off pretty easily. Ended up gluing mine in.
Hmmm, I never even thought of just siliconing them in. Ah well, the BMC's work well and very easy to install.
I think the BMCs are better anyway as they cover all the air inlet area. The DP tubes always left a gap near the front where un filtered air got through.
