V4 Tail Pack

I use the Kreiga rally pack on mine. You’ll need some straps off Amazon, but it’ll fit my sandwiches, a drink and something for pud, so is perfect for a day out.

 

givi 501 + suport tanlk lock seat

 

I have something similar. It's slim yet expandable. It's also durable, cheap and does the job.
https://www.amazon.ca/Motorcycle-Wa...sprefix=motorcycle+tail,automotive,180&sr=1-5

For a name brand and hopefully higher quality product, SW-Motech Pro Plus Tail bag is a nice alternative.
https://fortnine.ca/en/sw-motech-pro-plus-tail-bag-bc-hta-00-308-30000

 

Hi

Can you show a close up and how you mounted please... I was thinking of making an Aluminium plate - slightly smaller than the bag and bolting to the 4 holes the plate and bolting the rally bag to the plate

BUT the 2 sets of holes are not the same level and effectively angled - so the front set sits around 20mm higher than the back - when you tighten the front down... would need to add some bends or spacers?

So interested in how you strapped it.

I have fitted a small bag behind the seat - under the rack frame - from ebay - but need something a bit bigger above for a disk lock and maybe some spare gloves (took the wrong gloves on this mornings ride and had cold back of hands)

THANKS

 

I don’t use that any more, and now use the Ducati tail pack

 

Sw Motech Pro road Tail bag. Has long straps (with velcro keepers) and velcro strap options built in. Can fir it to loads of bikes on racks or rear seats.
https://sw-motech.com/en/products/luggage/tail+bags/PRO+tail+bags/4052572197356.htm

 

Thanks

But bigger than I was looking for

I also have the US5 from Kreiga and thats also bigger than I wanted

THANKS

 

Or … fits under the rack. Quite small
https://amzn.eu/d/efZdhTe

 

Yes - Thanks - I already have one similar to that fitted under the rack - was looking for something size Rally Pack to fit above without the mounting plate.


THANKS ALL

 

I use a kriega rollpack 20. It packs down and can fit under the seat (not sure if that's the case for the V4) and is perfectly waterproof in all conditions and takes a couple of seconds to tie down.

Regarding the 5ltr size, it's not a lot imo. Enough to stash some plastic overalls in, and maybe a snickers. But with the 20ltr rollpack, I'm still running out of space quickly when I use it.

 

The only thing that fits under the V4 seat is the tiny little puncture kit

 

What if you remove the toolkit? I can just about fit a toolkit pouch, fuses and the rollpack, just. It's tight, but possible.

 

It’s literally just a cut out for the puncture kit, no other space at all

 

OK

So here is the Kreiga Rally Pack - fitted to a 3mm Aluminium Plate (150 x 200mm) bolted to the Rack using M6 bolts and 2 25mm Spacers at the rear.

Just for future posterity for others.