Brake And Clutch Lever 1260 Multi

Discussion in 'Wanted' started by Nasher, Jul 6, 2025.

  1. Does anyone have a pair of standard Brake and Clutch Levers that would fit my 2019 1260 Multistrada Enduro.
    Perhaps you've swapped to aftermarket ones and want to sell on the standard ones.

    I'm sure the same levers fit many, many, different models.

    My bike came to me having been fitted with a pair of short really square section levers that I really don't like the feel of.
    Actually I don't like short levers full stop, and went back to standard levers on my 999 for the same reason.

    New or used ones appear to be really expensive, and as usual I'm after a bargain.

    Ta.
     
  2. Have a pair of full length Pazzos. Bought off of a member here but never used. They're not absolute A1 but functional. If they'll do and you want 'em I'll sell to you for the same £50 I paid. They were missing a spring but I've replaced that. Will organise a photo for you later.

    Pretty certain that the fit will be the same for the DVT Multi and the Enduro.
     
  3. Thanks Bumpkin
    Could you measure the length of them for me please, so I can compare them to what's on there.
    Current ones are @190mm from the pivot centre to the very end.

    Thanks.

    P7060005.JPG

    P7060006.JPG
     
  4. Will have a look in the morning.
     
    • Like Like x 1
  5. Got pair almost new standard levers off 2023 streetfighter. Imagine they'll fit if you want?
     
  6. The Pazzos I have are the same, 190mm.

    20250706_115213.jpg 20250706_115237.jpg

    In fact, as I've offered them to you that offer still stands, otherwise they look better than I remember. So, as per the discussion between Tom and Nick the Greek out of 'Lock, Stock & Two Smoking Barrels'. Fast forward to 42 seconds...
     
  7. Thanks @Bumpkin
    Unfortunately I'm in the office today, and that Video is being blocked by the firewall, I'll have a look later.

    They look very similar in size and shape to the no doubt much cheaper ones on there already, so I think I'll pass despite your kind offer.
     
    • Like Like x 1
  8. @Fraser Hi
    The part numbers for the 2023 SF and 2019 Enduro are totally different, but that might just be a colour difference or similar.
    Do you have any pictures?

    Ta
     
  9. hi @Nasher pics attached. appreciate not part numbers but only numbers on the levers are 0136 and 0137 if of use. cheers
    lever 1.jpg lever 2.jpg
     
  10. They look about right.
    Assuming the Brake lever has the pin underneath for the microswitch.

    Message me what you'd like for them and how I can pay you.

    .
     
Do Not Sell My Personal Information