(small) Bike Things You've Done Today

It was a bootiful day here in Longleat so I took the DT out for a razz around the lanes.

 

Iggy’s lookin pretty cool.

 

He said "thanks", but as you can see, he much prefers being warm

 

Took the Scrambler to someone I know for a bit of help to get a base set up on the new suspension. Nearly there but bought the wrong weight fork springs. Not a biggy for now but might get the lighter weight springs for Christmas Andy

 

Springs arrived, so finshed the clutch and went out to test... all good! Phew...

 

Corrosion on the evotech crash bungs have been doing my nut since i got the bike. Out comes the dremel.. needs a bit more going over

 

Does running errands on the bike, in the sunshine count?

 

That looks like a round part with good access? You might want to get some emery cloth tape, which will sort that out nicely. Its easy to do with one wrap around & holding the two ends to make a pulling back and forward motion.

Leaves a nice brushed look, so you could spray some clear over afterwards? I've done this a few times on fork lower legs and had great results.

 

Thanks, ive not done it before but will do that. The dremel made easy work of removing the crap paint i was happy with that for now

 

Pulled them off, need a bit more going over but so far looks good

 

At the ppma show today

 

Prepared it for a day out on Saturday, it’s been a while since I’ve had a decent ride out. It’ll probably piss down with rain now.

 

Why is the bike covered in dusty grime?

 

@Jackyboyhyper was cleaning the paint from the Alu spacers with a Dremel - in situ...