Other Bike Photo Gallery

Discussion in 'Other Bikes' started by Rob, Jun 4, 2014.

  1. That is a cracking photo and your Grandfather looks to be a splendidly dapper gentleman - shiny shoes, pinstripe 3 piece, bow tie and trilby. It's such a shame hats have gone out of fashion. Grandma suitably attired and, as you say, not wishing to appear uncouth and maintaining her modesty by riding side saddle.
     
  2. A couple of old Brits at the CTL Motor Company.

    triumph.jpg

    tribsa.jpg
     
    • Like Like x 1
  3. Dunno what it is about race sidecars but their build fascinates me - CTL Company again.

    Lovely bit of welding on that (substantial) headstock.

    welding.jpg

    It had two calipers on the LHS and only one on the RHS :thinkingface: To counteract a sidecar's tendency to turn left when braking perhaps?

    frontend.jpg

    Rear end with a short swingarm (UJ not in place) and what looks to be a tyre on the wrong way round.

    rearend.jpg
     
    • Like Like x 1
  4. 20180211_155032.jpg My mother back in the 60's sat on Bob Rowbottams outfit at the TT. He was one of the many also rans making up the numbers
     
  5. This R50 BMW has just had new main bearings fitted. The big ends were OK.
    20260612_152054.jpg
     
    • Like Like x 2
  6. img_1_1781500529783.jpg
     
    • Like Like x 1
    • Funny Funny x 1
  7. Norton 16H WD
    20260615_135142.jpg
     
  8. I don't think I've ever posted a pic of my other non-Ducati bike.

    ZB32 Competition - Glamis .jpeg

    It's a 1948 ZB32 BSA Competition currently fitted with a 1950 alloy barrel and head.
     
    • Like Like x 6
  9. That’s very nice. Do you manage to get out on it at all?
     
  10. Yes, I manage to put in 300 - 400 miles a year.
     
  11. Good on ya. It must be a great experience and a privilege to own.
     
    • Like Like x 1
  12. 20260623_115546.jpg

    Velocette race bike in preparation.
     
    • Like Like x 4
  13. Nice... what's the cannister zip tied to the front down tube for?
     
  14. I'd venture that it's a catch tank for an engine breather.
     
    • Like Like x 1
  15. Yes
     
    • Like Like x 1
  16. 20260623_115556.jpg

    This Velocette engine has a four valve head
     
    • Like Like x 1
  17. That's impressive. I seem to remember a firm called BMG back in the late sixties, early seventies who did a desmo conversion for Velocettes.
     
  18. It doesn't look like a 4V in the first picture with the rocker covers off.

    EDIT: It's a different engine
     
    #1639 Derek, Jun 24, 2026
    Last edited: Jun 24, 2026
Do Not Sell My Personal Information