for the love of dog ... can one of the admins PLEASE pin this post, so that folks asking torque spec questions can find them ALL in one place?
It's been posted all over this forum. In fact, it's in the service manual. The 2015 DVT torque specs are here in post #11: https://www.ducatiforum.co.uk/threads/workshop-manual-online-or-pdf-download.70748/#post-1590127 The non DVT 1200 torque specs are also posted in post #9 of the above thread. I wholeheartedly agree about pinning a sticky. On that note, all the service manuals should be up there and downloadable.
Hi ,I recently changed my clutch slave cylinder to an Oberon , but my bike is a 2010 , 1200S and does not have a anti rotating clutch rod. Do I buy one from Desmo racing,or just leave ? I feel if I don't get a anti rotating rod ,I will be only doing half the job Also i saw on the internet that you had to to take the petrol tank off to change the hydraulic lead . But I tied a Zip tie to the old on and took of any zip ties and other holders for the line and pulled the Hel braided line through,I think I could have done that without removing the tank ? I would be interested if that was possible without removing the petrol tank. Also I found an O ring about an inch and half,, but I can't find it it on any diagrams of parts ? All help is greatly appreciated. T.IA.
