Hi all.. Could someone please advise I am looking to get some kind of stick on material to go on the inside of my new carbon exhaust guards ... Anyone know what to use and where to purchase it... Many thanks Noods
the best solution like Char says is to get a price from Zircotec and pray they won't have your pants down too much. Does depend what your heat shields are made from as well. What is the problem with them? You could try the poor man's option and just get some thick silver adhesive backed tape and line it with that. Bear in mind that the heat from your exhausts will 'post cure' your carbon. It will discolour, and there's very little you can do about it. What bike is it noods?
this stuff works, cheap too Cool-It Adhesive Backed Heat Barrier - Demon Tweeks or Pitking Products Cool Tape - Demon Tweeks
Hi Guys I tried Zircotec but they didn't want to know they only want to deal in big quantitys .. The carbon is conquest carbon which is being sprayed by paint supremacy the bike is my Ducati Hypermotard 796 .. The original plastic exhaust guards had a silver heat shield on the inside.. Thank you all.. Noods
Bum - you need Steve from Conquest to place a big order and cut down :biggrin: Try Hilltop if the others suggested no good Heat Reflective Sleeving & Glass Fiber Firesleeves | Hilltop Products
Is the silver heatshield removable? The other option is to space it away from the the exhaust so you have a good 10 - 15 mm clearance. The problem you'll have in reality painted or not is that heatsoak will discolour it if its too close.
I got some stuff from eBay. I'll try to dig out a link. The one I chose has a material backing with a silver reflective finish. It's thin enough to go on the back of pretty much anything
