Hi Guys I have a job lot of cool Titanium bolts for sale that i have started to list on that popular auction site. As there are a lot of restoration projects in progress this spring i think some of them might be of interest to a few on here. If there is anything of interest i am looking for no more than half of the equivelent prices being asked commercially. Ebay seller id = England_expects Thanks and here goes. DIA LENGTH Pitch thread fixing drilled Notes . . . length . for lock wire . m6 25 1 full Torx Yes LISTED m10 42 1.25 22 Torx Yes M5 18 0.8 10 Torx Yes M8 43 1.25 17 12 POINT Yes LISTED m8 52 1 18 Torx Yes m4 34 0.7 12 Torx no 100deg counter sunk m5 32 0.8 8 bolt no m4 64 ??? 14 allen no m6 27 ??? 15 Torx Yes m5 50 ??? 15 Torx Yes m5 20 0.8 full allen Yes SS not Ti m5 42 0.8 14 Torx Yes m6 25 1 full bolt no SS not Ti m4 39 0.7 14 allen no m4 13 0.7 8 Torx no m8 16 1.25 full Torx no blue m6 15 1 12 Torx Yes m4 34 0.7 12 Torx no m5 56 1 14 Torx Yes ??? m5 64 0.8 14 Torx Yes m4 33 0.7 8 bolt no m4 38 0.7 12 Torx no m5 64 0.8 14 Torx Yes m5 13 0.8 full Torx Yes m4 33 0.7 9 bolt no m4 16 0.7 full Torx no £3 m4 20 0.7 5 Torx no m8 44 1 18 12 POINT Yes LISTED m5 64 0.8 14 Torx Yes m8 14 1.25 full Torx no blue m4 10 0.7 full allen no blue m3 10 0.5 full allen no blue m5 56 0.8 14 Torx Yes LISTED m4 33 ??? 9 bolt no m8 70 ??? 18 Torx Yes m4 36 0.7 12 Torx no 100degree counter sunk m5 52 0.8 14 Torx Yes m5 50 0.8 14 Torx Yes m5 46 0.8 12 Torx no m5 32 0.8 9 bolt no m8 14 1 full Torx Yes m4 11 0.7 8 Torx no m5 23 0.8 14 Torx Yes T25 ? m4 24 0.7 9 Torx no m8 32 1 18 Torx yes m4 19 0.7 12 Torx no m6 20 ??? 16 Torx Yes m6 20 ??? full Torx no m6 23 ??? 16 Torx Yes m6 15 ??? full Torx Yes m6 20 ??? full Torx Yes m10 30 1.25 20 Torx Yes blue m10 43 1.25 20 12 POINT Yes m10 56 1.25 20 Torx Yes m5 35 0.8 8 bolt no m5 60 . 13 Torx Yes m6 16 1 full Torx Yes m4 10 . full Torx no m4 20 . 10 Torx no m6 60 . 15 Torx Yes m3 21 . 11 Torx no m5 82 . 9 bolt no m4 32 . 10 bolt no Edit: crappy formatting on my part, sorry
Yes please..... But you'll have to wait until I figure out what I need from that list I'm thinking: Brake disc Calipers Engine casings Nuts? Do you have nuts...
No Nuts guys sorry. No Taper head either just whats listed here. All parallel head in either Torx as stated or Hex head( allen) and a few normal 6 sided plain old bolts. Thanks Cranker hope they do the job for you.
Cool, i have m8 x 43 x 1.25 pitch , 12 point fixing and drilled. m8 x 43 x 1 pitch, 12 point fixing and drilled. £3 each + £1 post. free post actually for 4 off Do you know which pitch you need ?
Both of the ones i have are threaded part way, about 18mm. Not a good idea to try to shorten them as the thread would be too short to be safe.
