I have some left over parts from my previous 998 and breaking another bike with quite a bit of RS parts on. I will list those as they become available. In the meantime, don't hesitate to make inquiries. 998 RS large volume airbox Large volume airbox for 998. The airbox has been cut quite a bit and sealed using silicon. It needs a good clean and relaying some epoxy / carbon. This looks like CM Composite. Large volume airbox is a good way to improve power. Looking for about £250 I will give with this some glass fiber large volume airtubes that fit on those. Alternatively I also have some proper 998 RS carbon airtubes with the sliding airfilters. POA for those. 996 RS yokes - wide track - 2 sets On set (pictured) in original Ducati chromate finish which is very rare by now. They come with a damper fitting on M8 (standard is M7) and thread has been helicoiled. Rest is great condition. Looking for £800 for bare yokes. I have another set that has been repainted, good condition as well. Looking for £600 There are 2 sets of eccentric that I can supply too. - standard Ducati set - £600 - Replica set in aircraft quality alloy - £400 5 spokes Mag wheels for 996 RS / 998 RS 16.5 - 5 spokes mag wheels Rear is 6.25 size They have been refurbished a few years back by griffs in Bristol. Not seem much use - good condition. Looking for £500 I can give some R420 tyres with them Note: The brake discs are not for sale. I also have a set of 10 spokes wheels for sale soon (also 16.5) All those are for wide track / big hub - won't fit road bikes. Brake discs for 998 F0, 999 RS, 1098 RS Set of 320mm 999RS brake discs - 5 bolts design 6mm fully floating. Those were in use on late models of 998 f0 and 1098 RS too. They will fit the standard 999 and 1098 road wheels with a 5mm spacer. The 320mm are in great condition - looking for £350 I also have a set 305mm coming up soon. H shaped Ti Rods Race titanium rods coming from a 998 engine. Stronger than road rods as used in all RS engines. They should also fit 996 and 999 engine (expect R I believe) as rod length is the same. They come with shells that were in use on the 998. Looking for £600 All prices + shipping at cost. Collection preferred Please inquire for any other parts.
