Must admit that would concern me, if they budge when you push it what would happen from a higher speed emergency....just sayin'
I find that my standard bars catch my hands on the edge of the fairing at full lock, 25mm higher would be difficult.
mc-motoparts.com Yea they still catch, I was worried theyd be make that worse, but to be honest not noticeable so far. I can still do a 3 point turn in a small road.
@Exige will be along very shorty to inform you about this fantastic upgrade. His cables are nearly twice as thick, more flexible and better sealed so hopefully once fitted, job jobbed! . No modifications needed to the battery T piece or box itself which is always a good thing. Ian
Might be worth changing the bars over. Left to right. A lot of people have done this in order to get more height and different angle.
Info here: For Sale - 999 749 Exact Start - Electric Cable Kits | Ducati Forum And here: www.exact-start.com Production batch available in a week or two for 848/1098/1198 - if interested let me know and I'll give you a shout. Stu
Could you give me a shout too when you have them, i'd want a set for a 999 aswell? I'll be away for 3 weeks from Wednesday but should get them off you after that. Ta.
Will do - hopefully by the end of next week - the terminals for the battery connection were quite trick to avoid having to cut the battery box lid which was critical for a quality installation. They are currently being manufactured and are due at the platers next week.
PM'd all other than: It's just a ride, who I can't seem to find and lost his e-mail, anyone know him? Terminals look trick - designed to allow standard fitment of the battery cover...
Just fitted a Xenon lamp into the dipped beam, so now have a useable headlamp - as always though, one change leads to another, as the Xenon beam has made the running lights look pants - LED bulbs now ordered, so they should be nice and white too in the near future
