Wanted - 9*6 Headlight Rubber Thingy

Discussion in 'Wanted' started by RickyX, Nov 29, 2015.

  1. Has anybody got a rubber cover thingy that fits over the back of the left hand headlight wiring for a 748/9*6?
    It's the one on the projector light that protects the wiring from getting wet.
    Cheers,
    R
     
    #1 RickyX, Nov 29, 2015
  2. Me too....but what good is that for preventing moisture ingress into an electrical connection??
     
    #2 RickyX, Nov 29, 2015
  3. No good :)
     
    #3 Exige, Nov 29, 2015
  4. Has someone deleted a post there or something? bit confusing.

    Anyway, to the point. Might have one in the garage @RickyX I'll have a look tomorrow and let you know. I've got a complete headlight with cracked glass on one side so I think it has the rubber with it.
     
    #4 scrawnsenior, Dec 2, 2015
  5. That sort of thing doesn't go on here surely :Hilarious:


    :Wideyed:
     
    #5 Exige, Dec 2, 2015
  6. Just looks like ricky is having a little chat with himself ;)
     
    #6 scrawnsenior, Dec 2, 2015
  7. Strange...I think you're right.

    If you could let me know, that would be great.
    Cheers,
    R
     
    #7 RickyX, Dec 3, 2015
  8. @RickyX Got one of those covers. The loom is all part of it though so think I'll have to cut the wires to get it off. Do you want the whole loom or just the cover?
     
    #8 scrawnsenior, Dec 3, 2015
  9. @scrawnsenior just after the cover really. Can't it be removed by pulling the plug through it?
     
    #9 RickyX, Dec 3, 2015
  10. I can undo the posts YOU have deleted if you like :)
     
    #10 El Toro, Dec 3, 2015
  11. @RickyX It can't be removed without either cutting the ends of the loom or tearing the cap. I only want the postage money so your call. I can send the whole loom and caps or cut it and just send the cap.
     
    #11 scrawnsenior, Dec 4, 2015
  12. The rubber plug can be removed by passing the connectors through the small rectangular hole in the end cap as I have done it before. However if the rubber is in poor condition then you may find it will split due to age. When I removed mine they were fine and I had no problems.

    I did this when swapping over some headlamp wiring. Use some WD40 etc. to ease the job.
     
    #12 Red998, Dec 4, 2015
  13. That's cool - I'll take the rubber thingy and loom and see what I can do. Let me know the postage and I'll paypal you some dosh.

    Cheers,
    R
     
    #13 RickyX, Dec 4, 2015
  14. No worries, PM me an address and I'll get it bagged up and off to you. @RickyX
     
    #14 scrawnsenior, Dec 4, 2015
(You must log in or sign up to post here.)
Do Not Sell My Personal Information