I have notices the strain relief boots on the top of the front forks are splitting has anyone successfully replaced these?
I have the same ohlins but mine seem ok, try calling MCT suspension in Stowmarket Sufolk and ask for Daren he is shit hot on Ohlins he may be able to help
You can get hold of these boots quite easily. They are the two wire type for AMP weatherseal connectors. You may struggle to get the new ones on unless you use the special tool to remove the pins from the connector underneath but if you are struggling let me know and I will talk you through it.
Are these the ones ? Bosch Rubber Boot for AMP TYCO JPT SUPERSEAL Jetronic 4 Pin Plugs / Sockets | eBay
I'm going to give it a try and see how I get on thank you for you advice. I will post pics on my progress
I gave Darren a call today but he was busy with a customer. His colleague asked for the part number from the fork leg so he could look up the part number for the boots. Not had time to do this tonight but will look up in the daylight tomorrow and go back to them. I have ordered some boots from Brands Hatch Performance tonight and might have a go myself but could end up riding to MCT in Stowmarket if I can't do it, thanks for your help
