Cannot find these anywhere for looking. Slipped off at cadwell yesterday and now need the eccentric cam type footrests. The hangers are fine but footrests sheared. To complicate things, I've two bikes and the cams are different diameters. I'll buy spares for both I think...
As described really. Ducati performance have used this system i have seen too. Both pairs i have use an eccentric cam to allow multiple locations of the footrest. I've had several sets of these over the years and always had spares. Sods law i need them quickly. I'm off to see a chap the makes the odd part for me when i need them in the morning but it's a reasonably complicated piece to do a short run of.
I have some of these which I made last year. If your still stuck after seeing your mate let me know and I will take a look for you.
Yup - proper shortage of those these days it seems. If the black part scews off.....? Ducati Scrambler Rear Gear Shift Toe Peg Folding PRO Black CNC Racing | eBay
A natural finish would be fine if you could have a look around please. Even if i have a batch made they'd take a while and i could doe with atleast one just to get me going
I've 3 toe pegs already, the diameter is much smaller and the constuction doesn't have a big enough cam. plus my fat arse putting its weight on them could be an issue
Ok I will look first thing in the morning. What time you available from it might be a good idea to contact you with some dimensions just to make sure they are what you are looking for.
I'm up from about 6am, but message anytime it's fine the locating hole is 20 mil, the grove in the male part of the toe peg is ten mil wide
I have a set of these. I know he supplies spares. CNC Ducati 748/916/996/998 Rearsets footpegs foot pedal
