Separate names with a comma.
I have a new one waiting for the bike to start to put it on. But this weekend I'm going to put it on and try to start it. All ideas are welcome...
The spark plugs give very good spark when I test with JpDiag, but not when it turns with the starter motor. At that time the spark only appears a...
If the neutral switch did what you say, the ECU would stop the starter motor, right? I have noticed that sometimes the green light on the...
Anyway I have a new battery waiting, it does not cost me anything to try, thanks for the advice.
The battery I use is usually connected to a battery maintainer and has a voltage of 12.6V. When I connect it to the bike, a voltage of 11.9v...
No, the bike rotates regularly, it seems that it can start at any moment but that does not happen. The spark plugs are new, they are perfect and...
How can I do that?
The starter motor turns perfectly, and when I act on the side stand or on the gearbox, the starter motor stops. If the neutral switch were to...
The battery is not good, that's why I always connect a car battery when I do the tests. At that time it would not be connected.
This is the screw you say, right? [ATTACH] [ATTACH]
So I can't use the hw610 on my bike?. Do I have to buy an HW103 and program it? At least disable the immobilizer, right?
I will try what you say Finm, but I think the ECU is being the main suspect.
This past night since I couldn't sleep, I have been manufacturing two ground cables with 25 mm2 copper cable. [ATTACH] I have placed them on...
You're right Ben, I didn't realize that. I looked at the stickers and not at the JpDiag data. So at some point someone changed the 96511803BA to...
The OEM ECU is bad and does not do the injector or coil test. Regarding the ECU Termi, I think they replaced the 203B map with 803BA and that is...
The starter motor is new.
That's where the idea of buying the multistrada came from, and it wasn't a good idea.
Hi Ben155 I already read that post. My bike has the ECU ground cable. I'll check the voltage across the pins. The starter is new, because it did...
Thanks Ben, I'll try that.
1.I haven't measured it, but from the air coming out of the spark plug housing when I remove it, I don't think that's the problem. 2. When I do...
