Separate names with a comma.
Try melting a Red crayon onto the Exhaust pipe Joints to lube the Joint some also works a treat for Tight or seized threads with some heat...
Thanks for the attached pdf, Yes I have replaced the Rear shock Ball Joint and installed 2 fat Viton ORings on each side to keep the sandy Crap...
Just before the Transmission Rebuild a few years back I had an issue with the ECU Fuse under the seat when it got to around 7k RPM it would miss...
At the time I was anal with the tyre balancing even went to a car tyre balancing shop to see if this showed up anything, new Tires every 12k make...
I've had an ongoing Vibration that keeps on destroying the number plate also the Fuses under the seat are also failing , Chain adjustment is as...
Only issues i've had are with the POS SACHS Rear shock. I was on a 12 day ride with the Wife back in Dec 2018, The rear shock was hammering our...
Thats the annoying part of sourcing parts out of the US, everything is $65 ! The UK is a much better deal ! I just bought a new Airbox and 2x...
Shit sums it up ! My Digital vernier was spot on, I also have a micrometer that will read 0.001mm not that its required, but I did verify the...
I also bought that Lazer Tool over a year ago, just recently I did the Desmo service and it does not work as intended. The EMS Duc Shim kit is...
much appreciated I'll check with the local guy here...
Thanks mwhite I'll check for this optional bulletin and see how
Found it ...... FWY-C-4F-B FURUKAWA ELECTRIC edit it seems the previous owner had a different seat installed as the OEM has 15mm of clearance...
MTS1200S 2013 Popped the seat off today and noticed the Starter/power relay wires appear to have been damaged by the seat base flexing against...
Is there a magnet on the drain plug ? You could check that if so.... or cut the oil filter open, then cut out a section of filter paper and...
Here is a list of Parts that I will source.... 1 x SKF BAH-0175 (Double Row Ball Bearing https://www.123bearing.co.uk/bearing-BAH0175-SKF.php ) 1...
After sleeping on this .... I pressed the Double row ball bearing out first, once the Ball bearing was out the spacer sleeve between the 2...
I would expect that both outer race's would sit up aganst a shoulder on each side in the eccentric housing as the circlip retains the ball...
I've got my bike up on the Lift to check the rear end out as it did kinda feel like something was loose when in a corner. After getting the...
Hey dont forget the left tit :p .... gotta keep things balanced !! Breastfed
Thanks for the welcome Gent's... BTW I hope my Avatar is approved ;)
