Separate names with a comma.
I've seen multiple and it's always the same spot, caused by (a) monkey wrenching the pinch bolts.
Or this: [ATTACH]
It's not. The connector is near the headstock on the right side.
Those are for the silencer connection. The vertical header does not have a gasket on the joint. [ATTACH]
Yes. Horizontal cylinder header part nrs: 2003 749 (shallow sump, grey swingarm): 57010731B 2006 749 (shallow sump, black swingarm): 57010731B...
Stock exhausts are the same for both swingarms, only the engine type matters. No.
You have the right to disagree but it's a fact that the mirror stays for the R's and facelift base/S models have the same dimensions :) I've had...
All the R noses are the "wide" type, same as facelift base/S.
If you mean the early base/S plastic fairing there aren't carbon supports available for it, only magnesium.
Same cast wheels on all 749/999 base/S models.
Fans are one speed only. First fan kicks in at 102 degrees, second at 103 or 104 degrees.
I have been using a Corse slipper since 2017. Surflex alu plates with white lithium grease, Molykote M77 on the ramps. Had to replace the spider...
Ducati does not list the bearings for a single sided hub. You're supposed to replace the hub completely, but obviously the bearings can be...
Not sure if that's 100% accurate but Speed Carbon definitely has the old CM Composit molds for their carbon parts.
Most likely this. The fairing is wrong for a facelift bike. Also the text on the side fairing should be silver, not black. Aftermarket fairing,...
Just noticed the painted spherical bearing on the shift rod. This gift never stops giving :sob::joy: [ATTACH]
:dizzy:
Bump.
https://shop.oemducati.com/en/products/superbike/2005-2/999_1/exhaust-system-42
One of those days again. [ATTACH]
