Separate names with a comma.
Are these worth it, would need powdercoating for a start, lots of small dings.... What mods for my 900ss do they need? Sprocket carrier? Ducati...
Certainly a good slection! Btw a guy just sold a carbon tank on one of the Supersport Facebook pages for $5000!
Good news, coming on nicely
As Al says, do it that way. I have a worn drive which has corresponding worn teeth on the screw in the head. I have a new drive but will need to...
Use etch primer on cases and side covers. On barrels and heads use high temp primer then high temp paint. Make sure surfaces are grease free! If...
And its a good one :sunglasses:
Sev, do you mean the mega expensive carbon tank? My front fender is warped at the back, Ive been told you cant reset it. It rubs on one side. So...
Who does decent carbon fibre for our bikes? I have heard of Onereo? Carbon King, RSR (currently doing discount for forum members use code...
[ATTACH] Got my head screwed on tonight! Head nut tool twisted so needs more metal welded to strengthen. Oil lines look ok too, wasnt sure of the...
Well spotted Al, new Hel stainless on their way, it was just a test fit.
I spoke too soon, you can twist the end gently and it'll move. Homemade stand needs painted too....[ATTACH]
[ATTACH] Oil lines arrived, not quite lined up the unions there will be a slight twist but it'll be ok.
Im certainly not gonna argue about anything, theres a vast knowlegde base on here hence the reason I post many questions, its all good. I will...
Gents, thankyou very much for your help, its much appreciated, I was starting to worry about how much work these pistons could cause me but you...
Sev, they are high comps. From what I have read they should drop straight in. Some use base gaskets and some do not. I am not planning to take it...
I used silly putty all the way around the piston edge and over the top in a cross. IIRC the base gasket is about 0.3mm These pistons are a...
Yep, I know. 1.6mm Think its wrought iron colour, lost cap [ATTACH]
Thanks Sev, I'll take a picture of the can. Its flameproof paint I bought for the headers, but since I got the Sil downpipes Ive used it on the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Lapping valves then rebuilding heads, measured squish on this front cylinder and Im going without base gaskets...
Rich, IMHO run with the standard 170, 180 gives clearance issues and turns in a little slower. Its a light narrow nimble bike so keep with the...
