Separate names with a comma.
This may help https://www.ducatiforum.co.uk/threads/ecu-pin-out-help.12301/
Contact Mark at Scorpio Electronics https://www.scorpio-electronics.co.uk/
The wiring looms do differ. On the donor dash Pin 2 and Pin 11 are NC (not connected) On your current dash Pin 2 and Pin 11 appear to go to the...
@Derek what is 49 in your diagram? BBS? ABS?
This should give you the comparison...
Look the same wiring wise...
It may work. However, sometimes Ducati configure the wiring looms differently. Canbus is used for a lot of the data transmission. The immo should...
It is a Bosch ME17.9.21 ECU https://oem-bike-parts.com/en/parts/ducati/2025/hypermotard-698-mono/electrical-devices-1-4180962...
https://youtube.com/shorts/aMZiWctmytM?si=TvuIZC1YGrj-4ejd
You need to move to Switzerland https://www.independent.co.uk/news/world/europe/switzerland-speeding-fine-record-lausanne-b2806341.html
Sorry, the Dash/Key type on your bike does not work with the process I identified for bikes using the key image I posted. I believe your bike uses...
The Orange One has made it difficult to conduct things by post. Check your PM later.
John Cellier has retired
Been about for years. Probably known better as Kess, as in Kess3.
I believe this bike uses the M3C ECU. Not one I have worked with. They can be reflashed.
Whilst visually you may think it looks great, you could be introducing a whole host of performance issues. Google ‘problems using too short...
Think it may be the relay 11 on the wiring diagram at the back of the owner’s handbook.
I would see if your bike has a fan relay. If it does then change it. A cheap part as well.
You either need to shorten the bobbin hooks or extend the length of the paddock stand arms.
Subscribe
