Separate names with a comma.
Neatest small one I've seen, esp with the built-in hooks to use the existing seat straps instead of having to invent something efficient:)
Nice Kriega bag:upyeah: Just ordered one - cheapest place is Ducati Manchester!
Ok, ok, PB & I will get a room :D:D
I've still got my SKF bearings 'bible'. Everything you'd ever need to spec a bearing...
Yes, and something that denotes the type of seal (i.e. its use or application). I used to have a huge catalogue 'CR Seals' by SKF - it had every...
Those of us locked down alone are unable to comment on hair state (if we're lucky enough to have some) for fear of 'glass houses' comments:p
Ta - I'll have a poke around. Anything on the actual seals...?
Definitely need a 'Me too' one. No, not the Epstein / P.Andrew type one, a 'same here' one...
It'd be interesting to know who actually makes these seals, and others. Your packaging says 'Made by Marzocchi' but I wonder why they would...
Nice :upyeah:
Laurie Lee followed up his 'As I Walked Out...' book in later life, following his 1930's route to & through Spain with his wife. That book - 'A...
Yes, ears open for all & sundry. Stopping the clutch rattling around (may be enough to just bung it in gear?) would help a bit. Again, at 14,000...
M6x1 is the thread description - 6mm diameter with 1mm thread pitch.
Interweb images such as this one should help a bit of you can't get better info. Horizontal one certainly looks easy... [ATTACH]
sounds like you're going to buy it anyway;)... I'd say when you see it make sure you view a proper from-cold start, so you can judge rings &...
Cool - got you. I'm not familiar with the 1100 service intervals - worth you getting hold of an owners manual to check - so can't advise. Hyper...
Fully agree with the above. Like for like, the force at the 4mm rad is twice the force at 8mm rad for the same torque. This very well explains...
If the current owner has no idea of last service that's not a good starting point! I'd say belts need doing about 5 minutes after you buy it...
Not so. The Torx/Hex/whatever is only the method to transmit the tightening torque. Imagine you are tightening the bolt from the central axis...
I'll try to remember to let you know when I replace my standard 939 exhaust with the just-ordered Pipewerx one:)...
