Separate names with a comma.
The two most dangerous phrases in the English language; Watch this! And Hold ma beer...
I don't enjoy all this stuff on cars, I definitely don't want it on bikes. The only option is pre about 2006? Bikes. My newest bike is 2006 MV.
I've decided to stick with the original as it works and just zip tied the plug. After a lot of faffing about fitting the air box, every time I...
So the next question is...my starter solonoid is the one with the white 2 pin plug. The plug looks extremely iffy and doesn't seem to fit very...
And here's the new ones I made. [ATTACH] Compared to the original.
My nearest Halfords is over 100 miles away.
So I've ordered 16mm2 cable, terminals, rubber insulating caps and a decent quality crimp tool. Enough for probably 3 bikes for about 50 quid...
They look very neat. Mine is a '95 and has a solid bus box connecting the 2 Half's of the cable together and the accessories cable. How did you...
Thanks for the responses, I was wondering if there is a recommendation for the size and spec for the cable?
Sorry, newbie, please explain 'other channel'
Hi all, just clipping the M900 back together after a big service and the last thing I looked at was the battery leads. I've always thought they...
Just my musings, I've had the bike for more than 30 years and I can't remember how many times I've changed the belts. So far so good. Also I've...
Blimey, I'm talking about my bike which is a 2 valve 900. It may be different for others.
Ok. It's a good guide. I used it for primary belts too. The time it won't work is on very wide belts like a custom Harley primary but I don't use...
Anyway got the belts on. I used a pair of large fine nose pliers to hold the vertical cam wheel on the mark. A bit fiddly, why Ducati have such an...
Yes, interesting about the pulley putting tension on the belt. I' ll set it roughly (about 10lb tension) before setting the V cylinder at TDC and...
There is only one set of timing marks so no choice?
The tensioner bearings wouldn't submit to the puller so the angle grinder with a thin wheel er..extracted them. So the new bearings were fitted...
Got the belts off and started on the idler bearings The rear one slackened relatively easily but the front one won't budge. I didn't get them...
I've got a bearing puller with very thin feet that I hope will work, I'll report back.
