Separate names with a comma.
Now that I've had chance to look in detail, the car roof has around 50 or so big dents, bonnet is similar, some of the side panels are also...
Well we've just had a huge rain/hailstorm with hailstones the size of golf balls, wooden garden table broken, holes in plastic chairs, dents in my...
Near London or not, take it to CJS if you want it doing properly...:upyeah:
I recently changed mine on the 916. I used a 6mm bolt with a 10mm washer to pull the seal down onto the guide as hitting them on with a suitably...
Just stopped raining in melton and, dare I say it is actually sunny! See if it holds...
I had my opener rockers done by Newman cams back in March, took about a week and around £45 each IIRC, this is still much cheaper than buying new...
996 fairings & biposto subframe?
Try; Gearing Commander: Motorcycle Speed, RPM, Chain & Sprockets Calculator load the presets and play with the sprockets...:upyeah:
I was in the workshop and had the parts to hand so tried my filters over a 916 bellmouth (think they're the same dimension as 748?). I have the...
As long as it goes over the bell-mouth then use a cable tie to hold it on, so it doesn't really matter if it's on the large side. I've got them...
'Sock' filters, like these; [IMG] Trumpet Socks | Pipercross Air Filters
Here's mine, there are basically 2 versions; this which allows the ECU to be fitted under the seat and the larger version that completely fills...
Yes checkout; http://www.thesharnbrookhotel.com/italian_carshows.html
Part no. 59310192A but long since discontinued, you might be lucky and find one somewhere? The actual working part is basically the same as the...
If it's a straight-through breather then it's designed for use with a larger (usually underseat) breather/catch tank and a reed valve in the...
Once it's off make sure when you refit it you use some lube on the threads, 916 manual calls for moly grease but copper grease also works fine -...
Ducati 1199 Panigale S Flatout/Vollgas in Nardo - YouTube
:biggrin: Yes, I got through about 6 tanks, 3 in one year and one leaked from new - that one was swapped under warranty but not the one that...
Sounds good to me... :upyeah:
No individual temp sensors on the cylinders on 748, 916 etc. Does sound like it could be an internal fuel pressure leak - not enough to stop it...
