Separate names with a comma.
Has the bike ever been on it's side, running?? That's pretty much a killer for the mains. There could be all sorts of causes...
I'd agree. There's little to cause that bearing to fail else end float in the crank...
Only ever use the very same split link as the chain. the 520 designation is just a standard to go by. Different chains vary so much. A 520 Tsubaki...
It works fine. I have a customer who's changed it and already put good miles on the setup. It may need one click down on the traction, but as with...
Hello there :upyeah: I'm over near Mansfield
I think if i'de have rode the 1098 into corners like i do the 748, then i'd have needed one. Just made the most of the extra grunt coming out and...
STM are without doubt very good. there's some good prices around to, but from experience if you need spares they can be more difficult to get. The...
I've fitted quite a few Sigma. Quality is up there with the big names and as it's UK based, spares/plates are easy to get a hold of to.
Saw both the Foggy and Hodgson reps both riders were guest riding at 1000 bikes last weekend. They didn't look right, for me anyhow....the...
Battery reset does nothing other than reset the clock:wink: if you're fitting the DP ecu then a tps reset in software is needed and a balance and...
Just pulling the trumpets out of the front and one or two holes in the back of the lid is pretty much as effective. Had a couple of recent...
Just repaired a near identical fault on a DD bike. The selector had jumped the selector drum. Pull the alternator cover off, free it up and check...
You can get all the parts you need from a Brembo dealer. JHP or Bike Torque Racing. Done quite a few for customers converting 749/999 to 748/996...
If the first plate wasn't sitting in the basket correctly, i'd guess the clutch pack needs adjusting. I fitted a brand new clutch last week and...
Is it just a reset that needs doing or has the TPS gone faulty? If it's just a reset, then the info above is spot on. Either a dealer reset or use...
7.5W is correct weight
The battery is a Gel type. YB12B-BS is the OE but you may see YB replaced with YT, or CB for instance....depends on manufacturer. Any decent brand...
The important thing to remember whenever tesioning belts, or checking them is that the relevant cylinder is at TDC and the valves closed. If not,...
In the workshop manual under "frame". If the manual you have was a download of the 'net, it's probably the draft copy that got leaked. It's got a...
Nearly....M10 x 1.25 x 60mm