Separate names with a comma.
And while you're at it dump the exup valve and motor. If Anth can't help with a reflash then PM me
We like happy endings :upyeah:
Prevents a voltage spike travelling back down the loom when the starter solenoid disengages. Looks like the leg to the red/blue wire has broken...
It's actually a diode. Honest. Can you please replace it ASAP. [img]
To diagnose if the coil is faulty try switching them over. Put the horizontal on the vertical and vice versa. The fault should manifest itself on...
Stuck on injectors if I am thinking of the right bike at Ducati John's.
Scorpio can repair your dash. They can also remove the coding so it will work without the original key. Scorpio Electronics
I think the ST3 like the 999/749 has this data inside the clocks not the ECU. The later bikes store it inside the ECU.
Won't work for you. The data is actually held in the IAW5AM ECU. It only works with the newer bikes.
I use the RAM mount system on my 3 bikes. The latest an 1198 uses a mount developed by Buybits that fits in the end of the clipon Ducati 848 evo...
Turned out to be a faulty motor and not a stuck butterfly valve. Hopefully all now removed and in a box in the garage :upyeah: If anyone is...
You need the Writer software from the creator of Ducatidiag (only worth buying if you want to flash new maps to your ECU). It works for the newer...
When was the fuel filter last changed?
Correct
You might see more racing if you turn up on the 15th and 16th of September.
According to the Telegraph article on it's launch £14,950 on the road Ducati 1198 S first ride - Telegraph
The usual issues are the valve is sticking or the cables need lubing or adjusting. As Anth says, these valves are there to attenuate the noise to...
If the exup is the cause, then yes. I've done this mod on both my Ducati and Triumph D675, and to date have not had any CEL's.
The exup valve stays in place, held in the open position by the spring on the pully. The gizmo bolts onto the exup motor and fools it into...
Possibly a seized exup valve due to lack of lubrication. Dump the Exup is the easiest remedy. Get rid of the cables to the valve and then either:...
