Separate names with a comma.
Do the above, and then tie the brake lever back to the bars and leave overnight
Just had a quick look at their website DDA Web Support: Home page, and no mention is made of mac only windows. Maybe contact them direct.
They sent me a complete outer case, but I only used the front. Was hoping that I could figure out a way to replace the acrylic in the front of...
Bought a set of torx drivers from Halfords. Part arrived this morning. All fitted and working. Had a look at the old one and there's no way to...
Took the dash off the D16 this afternoon. Fairly easy job, remove all the fairing and nose cone, slide the Ecu out of the way, undo 3 bolts and a...
Don't think I've ever seen one that wasn't a poor fit to be honest. I've always just used the ignition key with no key ring on the 998, although...
Still waiting for Ducati to get back to me to see if I can get it done for free, but good news is I can get just the front cover and lens from...
It's only the front cover which needs replacing, which unscrews, so whilst the innards may be different (though I doubt it, just re programmed)...
Mine mists. Found some info on another forum which seemed to say that in the UK replacement fronts were available under warranty for 1098 so...
Have sent email to Ducati Italy, so we will see. Annoying thing is its only the plastic lens, which, assuming the dash comes apart should be easy...
My D16 basically has the same dash as a 1098/1198. Put the bike away last night all was fine, got it out this morning and the dash had a crack in...
I bought and used Sterident tablets in my headlamp with warm water, worked a treat
The only "surprise" is that a traffic warden didnt appear from the shadows and give him a ticket for parking on the pavement !
Got me stumped, that eBay link you sent me, all the plates/sizes seem right as per the oe pack I bought. I just measured the old clutch pack I...
Doing the maths from the plate info my stack height comes out at 36.5mm, which it looks like would work for you as well. Have to admit I didn't...
If it's any consolation (and it isn't ) my D16 does exactly the same. Asked about replacement dash, but was basically told "they all do that to...
Okay, this may be no help, but here goes. Just fitted a new clutch pack to my D16. It's the same slipper clutch as fitted to a 749R, so assume...
Panigale Tricolore for me
Thanks for that, the clutch is only engaging when the lever is almost fully out and it is bordering on switch like. Figured it was the plates, but...
After 6000 miles the bite point on my clutch is right at the very end of the lever travel,making pulling away awkward, although the clutch hasn't...
