Separate names with a comma.
Thank you. Andy
Yep, that's the one. Sorry for the delay but we've been to Winter Wonderland in Hyde Park today and just got back. Andy
Very similar although the two forward fixings were bolted vertically downwards rather than the side as pictured but it would do the job admirably....
Was in Moto Rapido this afternoon and Steve showed me his 748RS rear subframe which had a carbon seat mount fitted where the 1.6M ECU attaches...
Head stock dust shields and bearings for the 916 Racing mag alloy off set triple clamp. Still need a few bits more but I'm nearly there. Andy
Just stripped my track tank to bare metal using a brass wire brush attachment for my off hand grinder. Got into all the nooks and crannies and is...
Overall length (305mm) and stroke (71mm) are the same but the 749 had a stiffer spring as standard. Andy
Thanks Dave, much appreciated and I'm sorry you are stuck in London away from home and loved ones. I'll get back on the Ohlins web site and see...
Dave, I have been unable to find any information under FG43 on the Ohlins web site so would appreciate a little spec information. I'm guessing...
If when you turn the ignition on the valve is not operated and you do not get an error message on the dash, chances are CJS have disabled it . CJS...
So the standard servo "motor" rotates and pulls a cable attached to the exhaust flap valve. The error occurs when the valve seizes and the "motor"...
Git :biggrin:. Andy
Just taken delivery of the serviced forks via DPD. Can't speak highly enough of the service JHS racing have given me and I have to say the courier...
Probably the fastest track on the BSB circuit and for a long time off limits for routine track days. An opportunity not to miss and I'm jealous...
Hi Nelly, I haven't checked what is actually fitted to the bike but my owner's manual states a 15 tooth front sprocket. I'm in the middle of...
So the standard front/rear sprockets are 15/36 and I am interested in hearing what others are running or have run on the track. My bike will have...
Looking in the parts list, Steve is bang on (as usual). From the picture, it looks like it stops the selector drum from rotating too far. Andy
Looks good. Andy
Will do. I should get the forks back next week so I hope to be making progress with the build over the holiday. Andy
Don't think my forks had been touched since the bike was originally bought in 2001. Interesting lesson though, perhaps we should be considering a...
