Separate names with a comma.
I run my Pirellis on the 916 at 37 rear 32 front without any issues
My belly pan is from a Monster 900 and had all the parts to fit, it came from ebay, but I think it was one originally sold by Spareshack. The...
+2 for Hawker. Had one in the SPS for years and the SS as well. Heavy but have plenty of oomph to start the beasts
Question is did he pressure wash the bike.
I'd go for the RD250 just to relive my misspent youth.
Getting back on track before this thread gets too wooden, sounds like if the engine is only running on the fuel in the float bowls. Which could...
A T50 torx bit fits exactly, and a T55 is just to big. My further thoughts would go something like, as you say thump an imperial hex socket in,...
Hi Chris, Welcome to the mad house, I'm sure the residents will be along. So a couple of starter questions, has this problem just started, or...
So moving on from Ducati wisdom and swing arm pinch bolts, I now have a more pressing issue. I have managed to get two of the three frame...
The pinch bolts go in from the top on my swing arm, so there may have been some wisdom. Possibly.
Shame I can't get some of your afternoons to use on my 750
The other thing to be aware of is the emulsion tubes becoming oval which also causes rich running.
Sprocket side, swingarm pinch bolt
I mean left and right hand threads
So to answer my own question, you need a 19mm and 17mm Impact socket a dead blow hammer and some socket extension shafts, so we now have the bike...
It's not ugly as such just different, you wouldn't see much of it by the time the body work was back on.
Now it's back in its original glory
There is a tendency for you to break at the weld through over tightening if memory serves
I'll have to take your word for it @Lumbux as I can't find a picture of the devil
Now now AL you are in danger of showing your age there
