Separate names with a comma.
My son uses a Penske custom built shock on his race 748, supplied by re-active suspension. Seems to be a very good and highly adjustable shock...
OK just checked it out, looks easy enough to send the file. PM as above.
I have a 998S Bayliss replica manual as a PDF file which is 60MB. You are welcome to a copy but I guess I would need to put it on a file sharing...
Oberon or MPL are both good. MC Motoparts also do a copy that looks pretty good but they are Hong Kong based so quality needs to be examined. I...
This wasn't from Wikipedia but taken from a now defunct Ducati site. I'd agree that Wikipedia is not always accurate.
Neil Spalding, now of MotoGP commentating fame!!! had one, I remember him telling me about it when he used to service my first Ducati quite some...
Taken from prior postings. The frame colour eventually changed from Gold to Silver along with the wheels. 748 Variations Variations Ducati...
A 748R (996R etc.) front end will fit but you will need the complete front end if you want to do the job. This includes forks, bottom yoke, discs...
I think you need to investigate further as something doesn't sound right. Easiest job is to take the wheel of and check how it is located....
Standard Marchesin's were 5 spoke or 10 if you have aftermarket ones, but they are quite rare. If you do have 7 spoke wheels then maybe you need...
Normally if you put the wheel on incorrectly you will note it does not seat fully on the hub. You will still be able to torque the wheel up but...
As mentioned above the wheel is located on short pegs on the offside hub, with the large wheel nut correctly torqued there should be no movement....
You could try their customer service email address and ask for a better explanation. I use a PZ Racing Camera and Datalogger set-up and I found...
I knew David and was aware of his illness which also claimed his wife some time ago. I did wonder why he was not seen on this forum much, if at...
I mentioned this to indicate what main bearing failure might feel like, if you have not experienced it before, and it's always worth a check. If...
If you can move the flywheel up and down then you may well have broken a main bearing. The bearings are in a plastic cage and if they break up...
Did you rebuild the whole engine or just change the sprag clutch. It sounds like you could have big end failure or there is a plug in the crank...
Is there a leak from one of the screws holding the cases together underneath and above the exhaust pipe. I have had a leak like that where a tiny...
I have seen a 998 that's the same and that was a one owner from new bike, so I don't know what's going on there then. Wouldn't surprise me if...
I have a 2001 748R engine and it has no filter screen, possibly some machines had them and others didn't. I have just a short blank plug with no...
