Separate names with a comma.
I should stress that in my experience this issue only appears to affect Ducati filters. Last year I got fed up with the minor weeps from the...
Hi, I have recently posted a reply on another thread regarding oil leaks from the filters if you don't torque them up correctly. I'm using a...
The o-rings are for retaining oil as the rod runs through the middle of the mainshaft. If you are careful as you remove and replace the rod you...
The thing that many people overlook is the need to actually clean the chain regularly, rather than just keep spraying more lube on it. It's the...
You live and learn everyday!
Wow, never come across that before. I've got an M600 Y2K model year, a 1993 900ss, a 1959 175TS and have also had a 2004 ST4 and all of them have...
Take your bike or a part of the fairing or something fairly small and flatish to any good auto paint supplier who should be able to scan it and...
I'd be happy to run for a bit longer if it were mine, however if any flaking has started it's only going to get worse not better. I had my ST4...
Take for pick, 11, 17 or 19 nm! Whichever, you'll find it much more than hand tight and a bit. Seems to work, but I'm expecting some swearing...
By coincidence I've had the same thing to one degree or another over the last couple of years in both my 600 Monster and carby 900ss. Always used...
The oil would almost certainly have been Mogul 15w50 300v Factoryline fully synth. It most certainly would not be the good cause of the problem as...
First things first, balance the injectors. I had an ST4 and agree with the previous comments that Dukes generally don't like low revs. However, it...
I'm in the process of restoring a 1959 175TS ready to do the Moro Giro d'Italia. Chassis is nearly done and the engine stripped, blasted and...
Sounds like it's only firing in one pot. Start with the simple things: Check battery voltage as if it's too low all words of weird stuff will...
Sorry mate, I've only for experience of older 2 valve and Desmoquattro engines. I'm sure someone will be along shortly to give advice or you could...
:astonished: Just be careful not to overshim the crank. Had an ST4 with less than 10k which knackered the main bearings due to it being about...
The wider range is the 'acceptable' tolerance when in service and the narrower range the 'assembly' values. You really want to aim for the...
Legend, will be sadly missed. There's so few doing that gentle, cleaver type of humour anymore. God, so many of my childhood memories have...
How's that for a coincidence! I've not done Kendo for about 5 years mind. Got my 1st Dan and then the club folded!
