Separate names with a comma.
The spring pushes a lever with a roller on the end of it against the selector drum so that is falls into the detents at each gear position. It...
It's not a big job but you will have undo the front header nuts which may present a problem.
It's a part of 3 possible springs. The return spring, item 1 in this picture: [ATTACH] Or the selector fork return spring, 20 in the picture...
I have now found that it works on the O2 network if you drop the first zero. ie. 080033228877
I have just worked out that it connects if I drop the first zero. ie 080033228877
Check it works with your network before using it in anger.
Update. It turned out that the problem was caused by a broken selector return spring. A bit had broken off it and then jammed the starter...
It should turn up but can take a couple of months. You should also be able to login to the Ducati website and download it but I can't remember the...
Tried that. Didn't work either.
I spoke to Ducati Customer care today and mentioned the telephone number. 'Oh yes', they said, 'you need to put a + in front of it, it's in the...
I had to use the Ducati Card Assistance to get my Scrambler picked up and taken to Ducati Glasgow for a warranty repair to the broken starter...
Well, I called Ducati Glasgow this morning and was a bit disappointed to find that I had to call Ducati Assistance to arrange for the bike to be...
It is a nice sunny day here today and thought I'd take the Scrambler out for a run. I got my gear on, wheeled the bike out of the garage, turned...
I have to agree, the M1R's are pretty basic.
The M1R forks fitted to the Pasos and early 851s are also 41.7mm
According to the handbook there is also a connector under the seat for connecting a battery charger. I would think this could also double as a...
Sorry, I have no idea I saw it on the wiring diagram but I'd imagine that it is near the steering head, probably under the tank.
The wiring diagram shows a connector for heated grips with a ground and and ignition switched +12V for heated grips. This might be a suitable...
Yes, the clearance will decrease by 1 to 2 thou. (0.025 - 0.050mm) No, the spec is the same although I believe that new old rings will settle...
I've seen a few where the half rings were broken into 2 or even 3 pieces, usually because the engine has been run with excessive closer...
